Click image to view full size image
brass tube fitting characteristic
Use for water flow in low pressure,
Use with hose tubing, Can be used repeatedly.
Material
All connector, nut are machined from brass JIS3604
Working Temperature
From -40°F~160°F
Working Pressure
150 PSI maximum
Assembly Instruction
1. Cut hose clearly and squarely to length.
2. Slide clamp on hose.
3. Lubricate hose. Push hose on fitting until hose bottoms against stop ring or hex.
4. As shown below, position hose clamp and secure with Screwdriver or wrench.
tube fitting
